Desertcart purchases this item on your behalf and handles shipping, customs, and support to Samoa.
🦶 Step into effortless control — your hands will thank you!
The Proxxon 38700 Foot Switch FS is a robust, hands-free ON/OFF controller designed for machines up to 500 watts. Featuring a durable fiberglass-reinforced nylon housing and optimized cord lengths, it enhances workflow efficiency and safety for both portable and stationary tools. Compatible with 12V hand-held devices via transformer, this footswitch is a must-have upgrade for precision and convenience.
| Actuator Type | Hinge Lever |
| Asin | B0017NP2M0 |
| Best Sellers Rank | #16,153 in Musical Instruments (See Top 100 in Musical Instruments) #43 in Guitar Amplifier Footswitches & Controllers |
| Brand Name | PROXXON |
| Circuit Type | 1-way |
| Color | Green |
| Compatible Devices | All devices with maximum power consumption of 5/8 hp (500 W) and two prong plugs |
| Connectivity Protocol | X-10 |
| Connector Type | Two-prong Plug |
| Contact Material | Copper, Brass, Silver |
| Contact Type | Normally Open |
| Control Method | Push Button |
| Control Type | ON-OFF |
| Controller Type | Foot Switch |
| Current Rating | 4.2 A |
| Customer Reviews | 4.8 4.8 out of 5 stars (153) 4.8 out of 5 stars |
| Global Trade Identification Number | 04006274387003 |
| International Protection Rating | IP00 |
| Item Dimensions | 11.81 x 1.97 x 6.89 inches |
| Item Type Name | Footswitch FS |
| Item Weight | 12 ounces |
| Manufacturer | Proxxon |
| Material Type | Nylon |
| Model | 38700 |
| Mounting Type | Tabletop |
| Number Of Items | 1 |
| Number Of Positions | 2 |
| Operating Voltage | 12 volts |
| Operation Mode | ON-OFF |
| Part Number | 38700 |
| Switch Type | Foot Switch |
| Terminal | Screw |
| Upc | 787721639503 006274387007 |
| Wattage | 500 watts |
User
Seriously. I don’t know why I waited so long to buy this. Improved workflow and safety.
If you haven’t purchased this foot pedal for your Proxxon rotary tool, run out and get one! It’s a game changer. Controlling the workflow with a foot pedal is much safer and more convenient than turning it on and off with the dial on the handle. I have a Proxxon model building and engraving set, 38515. It’s the best rotary tool I’ve owned. The foot pedal makes it even better. I wish I had purchased everything sooner. Can’t recommend it enough. There may be multiple versions, so check to make sure it’s compatible with your Proxxon system when ordering.
User
Great foot control.
It works great!
User
Works as described
What is there to say, you step on the gas, it goes. Steel construction, fairly heavy AC cord. If only buy one accessory for your hot wire table, get this! Being able to use both hands while turning the heat on and off with your foot is invaluable!
User
Appropriate for price
This foot switch works as intended. It makes a fairly quiet clicking sound when pressed, and takes a trivial amount of force to hold down. It is not variable resistance, so it will power up devices immediately. It comes with two screw holes for mounting to the floor, but will sit still just fine without that.My only complaint is trivial: This switch is only rated for up to 4 amperes. This is plenty for the Proxxon tools, and for just about anything else I can think of plugging into this pedal. If for some reason you're looking for a pedal that can safely handle more current, then you might want to consider a different product.NOTE: At least at the time of this posting, the picture is incorrect. The plugs on this product are for North American outlets.
User
Makes using the Proxxon so much easier.
I am used to the foot pedals on a sewing machine. This is so much better than flipping the switch on and off between adjusting the foam sheet keeping the alignment perfect. Also stops the odor of burning foam!
User
Great for the proxxon Hotwire table cutter
This switch is great for allowing two hands on the proxxon hotwire table cutter. A real improvement from trying to turn off the table manually and preventing the foam from burning. Seems a little flimsy but works better than expected with a satisfying depression feel.
User
A great addition to my Proxxon Tool
I wanted a foot pedal control v. having to manually shut my Proxxon Rotary Tool on and off at the end of the tool. If you are looking for something to control speed this is not what you want. it is strictly a on/off device. I have a couple of restoration projects and this will be a very helpful addition. I was mildly disappointed this foot switch was made in China but it is what it is and will work fine for my purposes.
User
Needs variable speed
Its ok if all you need is on or off but really this should have variable speed control.
User
No es la misma medida que aparenta en la foto
No fue lo que esperaba, no
User
Works great with my Proxxon foam cutter
Very good product. Works great with Proxxon foam cutter
User
110v Device!
Advertised incorrectly! This is a 110V device with a US plug, and the listing at time of writing does not mention this anywhere at all - had to return. Please be aware.
User
great safety product
use the foot switch as as a single source of power for all my power tools. This way I power only the tool that I'm using at the time and no hunting for the tools on off switch while it is running
User
Fonctionne très bien. Question securite c'est essentiel.
Fonctionne très bien . Question securite c'est essentiel.
Trustpilot
3 days ago
1 week ago