Ubiquiti Networks LiteBeam ac Gen 2 LBE-5AC-Gen2 5GHz Airmax 2X2 MIMO 23dBi 450+ Mbps CPE with Ethernet Surge Protector ETH-SP for Outdoor High-Speed (Pack of 2)

I’m not teck savvy and found the setup a bit complicated. I did however get it working and it seems to work well .

We need wifi in the ceramic shop on our property and could never get a decent signal from the house (100+ feet away), so I picked up this kit after a bit of web research. Setup was SUPER-easy (Search YT for "Ubiquiti LiteBeam 5AC Gen2 - PTP - How To Setup Guide") and I configured them in the house, as recommended, instead of trying to do it after mounting them. Once configured, connections marked with a sharpie, and placed into separate shopping bags to tell them apart, I took them down to the shop and installed them using 2 of the "Ubiquiti Universal Antenna Mount UB-AM (Original Version)" mounts, purchased here on Amazon. After mounting, I plugged them in, connected the PointA dish to my internet router, and the PointB dish to a wireless router in the shop (configured and tested during dish config). I connected my laptop to the wireless router and logged into the Ubiquiti utility and it said "Great connection". I hadn't even tried to align them yet! After some minor directional tweaking, the internet speed in the shop was almost as fast as inside the house. Yay! A couple of things to note: 1. I mounted my dishes under the roof overhangs to keep them out of direct sunlight and protect them a bit from the weather. I also screwed the surge protectors directly to the mounting pole. The mount location is up to you, of course. 2. You do NOT need a POE-capable router/switch to use this kit. The included POE injectors provide the required power to the dishes. 3. Ensure the POE injectors are INSIDE the buildings. There's no need to have them outside. The only thing that should be outside is the dish, the surge protector, and the ethernet cables. Again, up to you, but highly recommended to keep them inside. 4. I also purchased a 10-pack of 10' Cat6 cables from Amazon (Cable Matters brand). I just loosely coiled the excess cable around the top of the dish mount pole rather than buying shorter cables for the short runs. Bottom line: These things work and they work very well. Highly recommended.

Well all I can say is this system works well for what I need for cameras on barn and back of yard over 300 feet away plus wifi if needed in barn. It did need to be configured but that was easy with you tube video took a whole 5 mins if that to do. I am not techy so anybody could configure. Note I tried others that were plug & play and failed right out of box. Do your research this one works.

I have 2 sets of these on the property. 1 is pumping signal over 1/2 mile up the hill to an outbuilding the other out to my workshop and barn. Could not be happier, the cable I had running to the barn was in a high traffic area that I run heavy equipment over. After a few patch jobs I got fed up and bought these. Simple install and great signal. Could not be happier with the outcome. Update: now I have 3 sets.... after 2 years of use I finally had one device that died. Note to others.. if you don't have link feed and your cable is good, check another device on the same cable to validate. Factory reset, did standard and custom configuration, after 6 hours I gave up and bout another pair. I will say the newer versions are great, easy to setup and no issues connecting. After many storms, high winds, lighting strikes around the property and such, all the others are going strong.

Excelente compra. El paquete llegó muy rápido y en perfectas condiciones. Los LiteBeam AC Gen 2 funcionan de maravilla, la conexión es muy estable y el rendimiento es excelente, superando mis expectativas. Los protectores de sobretensión Ethernet también son de muy buena calidad y dan tranquilidad para instalaciones en exteriores. Muy satisfecho con el producto y totalmente recomendado.