Northwood Calliger Clothes Wringer – Manual Laundry Wringer for Better Moisture Removal Than Portable Washers or Dryers – Heavy‑Duty Off‑Grid Washing Machine Alternative - Gray

I love it. There is a little bit of a learning curve. You can't put zippers or big buttons through, but, for example jeans, you will still get a lot of water out by doing the legs and reversing them out. Instructions said large buttons and zippers can damage the wringers. And that makes sense since they are made of rubber. Don't just grab a garment and run it through. You want it to go through evenly so you won't get a big wad of cloth in the middle or the end. So I shook mine out and did a fold to run it through. Worked great. Everything was even. I also adjusted the tension accordingly. Very easy to do with handed tension screw on top. For example. I have some light weight pants that have ruffled elastic waistband and elastic at bottom of legs. Lessened the tension at both waistband and bottom of legs but tighted for the thin light weight material in the middle. Don't forget to put tbe wedge under tbe drain tray so the water will drain which way you want it to. The wringers took out much more water than I am able to do by hand. Like waterfalls amounts. And I did not come away soaking wet after doing my laundry. I am very happy with my purchase and do highly recommend. Oh almost forgot to mention, these are not some flimsy product either. Very sturdy made. Got some wright to ghem as well. I love it.

I had been saving up for this for awhile, as hand wringing was killing my wrists. We are apartment dwellers and eco-hippies that prefer to be as off-grid as possible for the sake of future generations. We live in the PNW, so line drying in the rainy winter season takes forever if clothing is well wrung. It took me less than 10 minutes to have it set up and working. This wringer does the job! 1) Quality: This thing is built like a tank (and as heavy as one, to boot)! Every piece seems to be well made. Some reviews mention wiggles, tiny nuts, and other issues. I'm guessing these have been addressed, as the handle fits like a dream, the thumb screws are large and easy to operate, and everything moves smoothly and is firmly attached. I expect this to last a lifetime if it's maintained properly. And that's the key, maintain it. Rinse it to remove leftover soap/dirt after use, air dry before storage, and lubricate moving parts regularly. 2) Assembly: Read the instructions. I repeat, read the instructions as they tell you exactly what to do. The drip tray does need to be bullied into place, but if you push down on the ends as you force it in it will pop right into the pegs -- just like it says in the instructions. I'm a middle-aged woman with carpal tunnel syndrome and arthritic hands, and I was able to do it, so most anyone of average strength should be able to -- IF YOU FOLLOW THE INSTRUCTIONS. 3) Usage: I've done 5 loads of laundry -- lights, darks, sheets, jeans, and towels/dishrags. Every single one of them went through like a dream. Fold zippers and small buttons to the inside of the fabric to avoid damaging the rollers/zippers. For large buttons, like on jeans, feed through leg first and stop before the button goes through, then back it out. Just like it says in the instructions. (Did I mention that you should read them?) Start with the top adjuster fairly loose and then tighten it by full turns until you get to the amount of wringing you need. Once you are used to it, adjustments are intuitive. It took me two loads to get to that point, so the learning curve is slight. Only heavy items needed to go through twice to get about 98% dry, I fed everything else through only once. Most of my laundry was dry within 4 hours on a 60 F, sunny day. (We dry on a rack on the balcony when there's no rain. If you have a large line to spread things out on, things will probably dry faster.) Drip tray notes: I used the wedge, although it may not be necessary as the tray stays put pretty well (as long as it's installed properly). Remember to tilt the tray so the lower end is on the side you are feeding the clothes into. Guide the clothing over the lip on the exit side so it doesn't get pulled beneath the wringer -- you will have a bad day disentangling it if you allow this to happen. 4) Handle: A lot of complaints about the handle. This is why we need more science education in schools. The handle is long due to basic physics, it's not a design flaw. The shape seems odd but is very ergonomic and is what allows you to spin it easily with little effort (as long as you set the tension adjusted properly). Our mounting bolt fit well with no wiggle, and the thumb screw makes it easy to take off for storage. 5) Mounting brackets: Remember, we are in a tiny apartment. Our double kitchen sink is the best location for us to do laundry, as my back doesn't enjoy kneeling next to the bathtub. A dedicated washtub setup isn't an option in our space right now. The brackets can be moved to several configurations, so we were able to easily attach it to the center metal divider of our double kitchen sink. I use dish tubs inside the sinks as our wash tubs, and can easily switch the drip tray to slant toward the wash or rinse side as needed. Set the wringer in the dish tubs and slide it all under the kitchen sink for storage. Easy peasy. One minor complaint: The mounting bracket discs that are in contact with the attachment point, a metal sink in our case, would work better if they had rubber flanges on them to provide better grip and to protect the sink. I'm going to stop by the hardware store this afternoon to find a hose length or something that will work to rubberize them, but adding flanges would be a minor upgrade with a major impact for Northwoods Calliger to consider! I 100% recommend this product. Just read the instructions, know that it needs a sturdy base, and then read the instructions again.

Opening this package, I found a heavy duty contraption from the olden times. Inside are detailed instructions on assembly, use, and maintenance, all of which are easy to follow. It becomes clear as soon as you open the package that they obviously care about their product and have built it to last. Use: After washing some laundry by hand, I took an article of clothing out, dripping wet, and fed it though the wringer. I adjusted the tension knob on top, the thing worked perfectly, leaving the article feeling as if, if not less damp than if it just came out of the spin cycle of a washing machine. (remember to use the wedge which is included in the package for the drip ramp to stay properly oriented.) Overall thoughts: outside of the above mentioned, I wasn't looking to spend as much as I did on this but I can't argue against its value and feel like, for what you are getting, the price is fair. I'll be using this a few times a week and after some time has passed, I will make an update to this. (10/8/21) 6 months in (4/3/22): I still like it. I live in a small apartment with no laundry facilities and I hate going to public coin operated facilities. The wringer has allowed for me to do my laundry since my first review and saved me it's equivalent cost in running coin machines. Cons: it should not be used with items which have buttons or zippers. I still run small buttons through, but I make sure they are flat and reduce the tension on the rollers to prevent damage. I've also noticed it has a difficult time with thin items, like summer pajama pants, where I have to crank the tension knob down to get enough pressure but thankfully thin items usually dry faster anyway so I don't fuss to much with this. I would still recommend this item. It's pros for me far outweigh the cons, and the cons are just minor inconveniences. Edit: approaching the 4 year mark of using this thing. Still works. No edits to previous remarks. Edit edit: December 2025 - I'm still using this regularly. I had to put some 3 in 1 oil on the tension knob as the screw part was showing some minor corrosion. With how much I use this, this was to be expected. Still recommend this.

The wringer works fine and is easy to setup for first time use. I like that the tension knob is easy to access so I can loosen and tighten it as necessary for the clothing. From very tight on socks to very loose getting jeans through. For big guy clothing, Folding stuff in half is required making things like jeans harder to process. I found the wringer width a bit restricting for my shirts and pants. It functions as designed, is solid, adjust quickly during use, and is easy to mount and dismount. The first problem I encountered was mounting. I have a plastic tub and it didn't support the wringer. I built a wooden platform to sit abutted to the tub. That created the 2nd problem. The drain ledge is quite short and dumped wash water on the tub edge, not in the tub, losing half. If it was about 1" longer, it would provide more mounting options. A plastic sheet taped to drain ledge solved this and all the water now runs down the sheet back into the tub. The wringer is a good tool that can be adapted to your work area. I adapted it with a mounting frame and plastic water guide. After a couple of wash loads, I can see a need for transition table space and a handy basket before the clothes go on the line. The wringer is a good way to get the clothing from dripping wet to just wet.

The Calliger Wringer is a joy to use, it makes car washing vastly more enjoyable now. The mounting system is superb, extra heavy duty. Once this is mounted securely, it will stay mounted unlike any other wringer I have tried. And the spring tensioner on this unit is superior, it features a large type spring tensioner unlike other units with coil springs. Coil springs are difficult to adjust and do not provide even pressure on the roller. The drip tray on this model is much better also. It is larger and actually works. The Calliger is an absolute pleasure to use, wringing out the chamois is so easy. And with one pass through the Calliger not one more drop can be extracted. The Calliger squeezes 95 to 98% of the water out of the chamois. I can't say enough about this model. Highly recommended. For mounting I cut a 2x6 as shown in the photo. 11" x3" is the part that goes into the bucket and that gets secured by 2, 3" screws on each side through the bucket walls and into the wood. The top part of the 2x6" is 17" across where the wringer is attached. Once the wringer is tightened down it doesn't budge because I put 1 bag of quick setting concrete into my bucket to weigh it down. It is heavy but I wheel it around with a hand truck. Update: I found a much better mounting system using a sawhorse. Since the included photo of the sawhorse was taken, I added a cross-brace (2"x4"x36") from one set of legs to the other. This is lighter, easier to move and elevated higher making it easier to use while washing the cars. I have included photos of both setups with this review. By the way, if you use the inexpensive sawhorse brackets available at Lowe's or Home Depot or Amazon, I recommend using wood or drywall screws to secure the brackets to the 2x4's. This will make the sawhorse considerably more solid. The sawhorse is lighter and easier to use than a bucket filled with 60 lbs of concrete. It is also the perfect elevation for loading the items into the wringer. I the pleasure of dealing directly with the marketplace seller of this item and they are the best! Very customer oriented and helpful. I had a slightly defective part which they replaced immediately. I have to say 5 stars because that is the highest rating available but they deserve more stars. Buy this wringer, you will not be disappointed..

High quality wringer! We purchased this when our 10 year old washing machine was no longer doing it's job. The kids and I both enjoyed using this tool. It was easily adjusted to just about any table top or counter top. It is heavy, so pick a good spot for it the first time.

I've wanted this for a while now, ever since discovering that they still exist! It's one of several items I purchased to set up a hand washing laundry system outside on my deck during the summer months. The other items were a Ball Clothes Washer Deluxe and a Behrens Washboard, which I also reviewed. I did a lot of reading about this item on their website, watching YouTube videos, etc., so I felt like I had a good idea of what to expect. It was everything I was expecting. I will say I was surprised at how heavy it feels. I read the weight before ordering but once it's in your hands you realize that it has to clamp on and essentially stand up on something, and then the weight seems more significant. For example, I had clamped it onto the backrest of a shop stool/chair and it was so tippy that I couldn't even crank the handle or the entire chair would tip over backwards. I ended up putting a cinder block on the foot of the stool as a counter weight and that worked nicely. Just something to keep in mind when you think about what you plan to attach this to. It came with very clear directions on glossy heavy paperstock, a small detail but it made it very easy to prop up and read as my hands were busy holding the unit. The drain plate is a little awkward to get into place, it took some different approaches and then I was able to push it into place. The clamps are multidirectional as shown and there are three positions to move them closer together if needed, using the enclosed allen wrenches. I've only done one load so far to test it out but so far it's great. I think I'll need to play with the tension a little to find a good position for various items, what worked well on a bunch of towels didn't work as well on a pair of flannel PJ pants for example, so it may need to be tightened or loosened slightly depending on the item. That's an easy turn of the knob, so that's fine. I was concerned about the exaggerated style of the handle, how it protrudes WAY out, but it turns out to be ideal. I can stand close to it and turn it as I feed items through and it clears my body entirely without getting in the way. My only disappointment is that the directions say not to put items with "large buttons, snaps and zippers" through it, which surprised me given that jeans are mentioned in the description. But their suggestion is that you can wring the jeans up to the part with the zipper, and then reverse it without wringing the top of the jeans. I suspect some people will say they do it anyway and it's fine, but I don't want to risk messing up the tension or tearing the soft rubber rollers, so I wouldn't dare. It's something I hadn't realized, but not the end of the world. Overall it feels very well made and I'm glad I invested in this.

Complete piece of trash. I don't know who designed this garbage, but they don't deserve to call themselves an engineer. I've bought this product twice now and BOTH times, the rubber around the shaft that cranks just completely separates from the shaft, itself. I'm following all the instructions, I'm not cranking the tension screw down too much. It just fails because it's a low quality design using cheap, low quality materials. Now, it's possible that I would be more charitable with my review, if I could just buy a new crankshaft and trade it out. But no, that won't work because the company doesn't seem to sell stand alone parts and the stupid thing is like a rubik's cube to disassemble, anyway. So, if I want it fixed, I either have to complain to the company and jump through a bunch of hoops every time one of these breaks (I've had it for a few months), or I have to spend another $160 on a whole new one. Let's talk about the mythical world where it doesn't break within months... two cranks and the screws loosen themselves up and it starts to flop around at the clamps. If you crank the clamps down hard enough so they DON'T loosen, you bend the structure of the clamp. The snap rings that hold the little cups on the clamp screws? Yea, they love popping off on their own, and good luck finding them when they do. How about the whole purpose of this useless hunk of junk in the first place? Clothes still so wet afterward, they take a cycle and a half in the dryer, and some clothes are STILL damp after that. Personally, I'm tired of wasting my money. I'll find a competitor who doesn't hire incompetent engineers.

Bon produit fabriqué en Angleterre. Belle qualité.

Wie gewohnt, super - schnelle Lieferung, diesmal über Amazon.com. Nach langem suchen und überlegen von Alternativen (Wischmopschleuder, 2 Eimer ineinander, etc.) doch noch eine Lösung wie früher gefunden. Leider findet man solche Handwringer in Deutschland nur noch auf Flohmärkten o. dergl. , wenn überhaupt, und es stellt sich mir die Frage warum eigentlich ? Ich bin sehr froh über diesen, der Zusammenbau ist einfach und schnell erledigt, zudem mit versch. Möglichkeiten ihn zu befestigen und mit Wasserablaufbrett (weniger Verlust von Waschwasser, je nachdem wie man wäscht). Und er macht seinen Job, so wie er soll, ja es macht richtig Spass, besonders da die Kurbel sehr leichtgängig ist. Meine Wäsche besteht aus T-Shirts, Pullis, Jeans, Socken, Handtücher, etc.. Bei Jeans oder Sachen mit Reissverschluss habe ich es weiter eingestellt, da bleibt mehr Wasser, aber dass ist meiner Vorsicht geschuldet. Der Rest wird sehr gut trocken. Natürlich nicht wie in einer elektrischen Wäscheschleuder, aber das ist ja auch kein passender Vergleich. Er macht die Kleidung so trocken, dass man sie dann gut draussen oder innen aufhängen kann und sie nicht ewig braucht um zu trocknen. Ich finde es super ein "altbekanntes" geniales Teil so neu kaufen zu können (was heute auch noch viele Homsteader in den USA verwenden). Ohne Strom, ohne Schmerzen in den Gelenken, ja ich bin ganz glücklich - ein weiteres Stück Unabhängigkeit. Über die Haltbarkeit kann ich noch nichts sagen, aber es macht einen sehr stabilen Eindruck.

Ist mein erster Auswringer und damit auch der beste den ich hatte. Etwas schwer aber funktioniert tadellos. Leider hat es der Verkäufer nicht geschafft eine brauchbare Rechnung zu erstellen.

Va genial!

Great value Item is used in commercial setting helping to deal with stain remediation in linen . Works well and is easy to use. Install instructions a bit vague but online video helps