Dynastus Touch Up Composite HVLP Air Spray Gun Auto Car Detail Paint Sprayer Spot Repair, with Filtering and Protective Kits

This gun lives up to it's best reviews. It performs perfectly and produces a high quality finish. Atomization is perfectly dispersed with the well machined nozzle. I have used every type of spray gun ever made over the past 50 years and I have to say that this gun is by far the best I've found in this or any price range. You can take the word of a well seasoned professional spray finisher when I say try it yourself, you will not be disappointed.

This is a lot of gun for little money. Used to spray vehicles professionally years ago. Have used some of the best HVLPs money can buy in SATA, Devilbiss, Sagola etc... Now I mess around at home periodically doing small repairs and just wanted an inexpensive unit. This gun is great. The only thing that seemed odd with it was the amount of radius on turning the fan pattern knob. But it stayed put once dialed in. Sprayed this tri coat tonight at 25psi. Atomized beautifully, layed flat with very little overspray. Pretty happy.

I am doing a motorcycle restoration so good painting is a must, this little thing worked great and was cheap to boot. I recommend if you need to do painting of any kind on a budget. A word of warning, you may see the nozzle size and think you need to thin crap out of your paint, but resist, I found that in some cases it would spit every now and again with an overly thin mixture, keep it on the thicker side of thin and it sprays on great and leaves a nice finish.

Muy buena herramienta, ya tengo tiempo utilizándola y es confiable y brinda buenos trabajos

Well I definitely had my doubts when I saw some of the reviews but my instincts said this is just what I needed. I purchased this specifically for applying Dura-Coat which is a firearms finish. Many of the manufacturers of these products say you can use an airbrush. NOT. Anytime you need to use a hardener an airbrush is a hassle. This gun did everything I needed it to do with no flaws, it actually exceeded my expectations. Check all of the connections before using and tighten if needed. The base nut on the trigger was loose and just needed to be cranked down. By the way, the tip is .8mm not 2.8 and that helps if you're doing smaller projects!

Spray gun was great although I found the threads into the comoosite body to be a little iffy. Contacted the seller and everything was resolved very fast and above expectations. Would definately reccomend products from the seller

I have only good things to say about this spray gun. I used it for spraying Cerakote and it worked perfectly. Spray pattern was consistent and my finish turned out perfect. I did use a local pressure regulator and water filter on the line next to the gun to keep it in the right range. Between the regulator on my compressor and the local one it held steady and gave great results.

Great little paint gun. .08 tip works well with thin liquids. Atomization and Adjustable Spray Pattern layed down a smooth wet coat without drips or runs.

I was looking forward to getting this gun after the good reviews. However it gives inconsistent results.